New concept of a passive house - from design to realisation

Show simple item record

dc.contributor.author Pusnik, I.
dc.date.accessioned 2016-07-18T10:42:48Z
dc.date.available 2016-07-18T10:42:48Z
dc.date.issued 2015
dc.description.abstract Papers presented to the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 20-23 July 2015. en_ZA
dc.description.abstract The article describes details of a new concept of the passive house. The passive house is a synonym for energy efficient house with energy demand for heating QH less than 15 kWh/m2·a and a primary energy demand QPE less than 120 kWh/m2·a. In climates where active cooling is needed, the space cooling energy demand QC roughly matches the heat demand requirements above, with a slight additional allowance for dehumidification. Another requirement is related to airtightness. Uncontrolled air leakage shall be less than 0,6 of heated volume per hour at increased and decreased pressure of 50 Pa. Thermal comfort must be met for all living areas during winter as well as in summer, with not more than 10 % of the hours in a given year over 25 °C. This concept at the beginning encountered energy efficiency only but had a few drawbacks in terms of user comfort and potentially even health aspects. Two main drawbacks were dry air in winter and unknown air quality in terms of CO2 which could resulted in bad air quality in spite of the mechanical ventilation system with heat recovery (MVHR). At the passive house conference in 2008 (Nürnberg, Germany) I presented my own passive house project, which introduced floor heating only instead of heating through the ventilation system [1]. Another improvement was implementation of the MVHR with rotary air-to-air enthalpy wheel which was developed many years ago but commercially available device with sufficient efficiency was offered shortly before my project started. This system prevented fast dehumidification of indoor air in winter. Based on the developed CO2 measurement unit in our laboratory the speed of ventilation in the heat recovery system was regulated in order to maintain fresh air under the limit 1000 ppm of CO2. After almost 4 years of living in the house and regular measurements of climate variables (temperature, relative humidity, CO2), analysis of energy invoices for 4 winter seasons (2011-2014) with calculated energy consumption proved the economic investment and energy efficiency with increased living comfort and assured healthy environment in terms of fresh air. en_ZA
dc.description.librarian am2016 en_ZA
dc.format.medium PDF en_ZA
dc.identifier.citation Pusnik, I 2015, 'New concept of a passive house - from design to realisation', Paper presented to the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Florida, 20-23 July 2015. en_ZA
dc.identifier.isbn 97817759206873
dc.identifier.uri http://hdl.handle.net/2263/55870
dc.language.iso en en_ZA
dc.publisher International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics en_ZA
dc.rights © 2015 University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria. en_ZA
dc.subject Passive house en_ZA
dc.subject Energy en_ZA
dc.subject Heating en_ZA
dc.subject Summer en_ZA
dc.title New concept of a passive house - from design to realisation en_ZA
dc.type Presentation en_ZA


Files in this item

This item appears in the following Collection(s)

Show simple item record