dc.contributor.author |
Ibrahim, Qusai
|
|
dc.contributor.author |
Akbarzadeh, Rokhsareh
|
|
dc.contributor.author |
Gharbia, Salem S.
|
|
dc.contributor.author |
Ndungu, Patrick Gathura
|
|
dc.date.accessioned |
2023-09-12T05:48:19Z |
|
dc.date.available |
2023-09-12T05:48:19Z |
|
dc.date.issued |
2022-10-25 |
|
dc.description |
DATA AVAILABILITY STATMENT : Data are available upon request from the corresponding author and
based on university rules. |
en_US |
dc.description.abstract |
The performance of a desalination membrane depends on a specific pore size suitable for
both water permeability and salt rejection. To increase membrane permeability, the applied pressure
should be increased, which creates the need to improve membrane stability. In this research article,
a molecular dynamics (MD) simulation was performed using ReaxFF module from Amsterdam
Modeling suite (AMS) software to simulate water desalination efficiency using a single and multi-layer
graphene membrane. The graphene membrane with different pore sizes and a multi-layer graphene
membrane with descending pore size in each layer were designed and studied under different
pressures. The stability of the membrane was checked using Material Studio 2019 by studying the
dynamics summary. The single-layer graphene membrane was evaluated under pressures ranging
from 100 to 500 MPa, with the salt rejection ranging from 95% to 82% with a water permeability of
0.347 109 to 2.94 109 (mm.g.cm2s1.bar1), respectively. Almost 100% salt rejection was
achieved for the multi-layer graphene membrane. This study successfully demonstrated the design
and optimization of graphene membrane performance without functionalization. |
en_US |
dc.description.department |
Chemistry |
en_US |
dc.description.librarian |
am2023 |
en_US |
dc.description.sponsorship |
The Faculty of Sciences at the University of Johannesburg, South Africa, |
en_US |
dc.description.uri |
https://www.mdpi.com/journal/membranes |
en_US |
dc.identifier.citation |
Ibrahim, Q.; Akbarzadeh,
R.; Gharbia, S.S.; Ndungu, P.G.
Design of Multi-Layer Graphene
Membrane with Descending Pore
Size for 100%Water Desalination by
Simulation Using ReaxFF. Membranes
2022, 12, 1038. https://DOI.org/10.3390/membranes12111038. |
en_US |
dc.identifier.issn |
2077-0375 |
|
dc.identifier.other |
10.3390/membranes12111038 |
|
dc.identifier.uri |
http://hdl.handle.net/2263/92270 |
|
dc.language.iso |
en |
en_US |
dc.publisher |
MDPI |
en_US |
dc.rights |
© 2022 by the authors.
Licensee MDPI, Basel, Switzerland.
This article is an open access article
distributed under the terms and
conditions of the Creative Commons
Attribution (CC BY) license. |
en_US |
dc.subject |
Graphene |
en_US |
dc.subject |
Membrane |
en_US |
dc.subject |
ReaxFF |
en_US |
dc.subject |
Material studio |
en_US |
dc.subject |
Desalination |
en_US |
dc.subject |
MD simulation |
en_US |
dc.title |
Design of multi-layer graphene membrane with descending pore size for 100% water desalination by simulation using ReaxFF |
en_US |
dc.type |
Article |
en_US |