Abstract:
Post-curing cycles have an effective impact on the thermal and mechanical properties of thermoset composite materials. Typically, post-cure cycles use heat to expose cured resin parts to high temperatures in an attempt to maximize their final properties. In most cases, these processes allow composite parts to achieve the highest possible strength and become stable. In industrial practice, however, it has been found that there are potential consequences of performing localized repairs on composite parts in an autoclave where the localized repair undergoes a normal curing process while the parent part undergoes an additional curing process. Thus, for the parent part, prolonged exposure to high temperatures can trigger a process of decomposition of the resin matrix, as could be the aging phenomena of composites in service. In such a scenario, two practical questions are worth asking: (1) to what extent can a resin matrix be post cured without risking degrading its thermal properties? (2) what are the residual mechanical and physical properties resulting from prolonged exposure of composite parts to elevated temperatures? In this work, an analysis was carried out to estimate the potential adverse effects on thermoset composite parts made of carbon fibre and epoxy resin materials commonly used in aerospace, in terms of thermal, physical and mechanical properties after a long exposure to high temperatures caused by multiple post cure cycles. Two types of prepreg laminates were used to make monolithic test panels using twill and plain weave architectures for the M21 and 8552 test panels respectively. Thermal tests were conducted to evaluate the evolution of the degree of cure, the glass transition temperature and the inter-laminar shear strength of post-cured panels, which were subjected to a different number of post cure cycles. The study found that multiple post cure cycles alter thermal properties, which in turn have adverse effects on physical and mechanical properties. The results demonstrated that the two types of composite materials respond differently to changes in properties. Twill weave panels quickly reach full cure after three stages while plain weave panels have undergone gradual curing. This difference in the curing process of the resin matrix clearly influenced the changes in the measurements of shear, surface hardness and compressive strengths.
