Aerosol particle morphology of residential coal combustion smoke

Show simple item record

dc.contributor.author Makonese, Tafadzwa
dc.contributor.author Forbes, Patricia B.C.
dc.contributor.author Mudau, Lorraine
dc.contributor.author Annegarn, Harold J.
dc.date.accessioned 2015-05-08T11:12:47Z
dc.date.available 2015-05-08T11:12:47Z
dc.date.issued 2014
dc.description.abstract A study carried out at the University of Pretoria characterised aerosol particle morphology of residential coal combustion smoke. The general approach in this study was on individual particle conglomerations because the radiative, environmental, and health effects of particles may depend on specific properties of individual particles rather than on the averaged bulk composition properties. A novel, miniature denuder system, developed and tested at the University of Pretoria, was used to capture particle emissions from the coal fires. The denuder consists of two silicone rubber traps (for gas phase semi-volatile organic compound monitoring) in series separated by a quartz fibre filter (for particle collection). The denuders were positioned 1 m away from the fire and were connected to pumps that sampled ~5 litres of air over a 10 min sampling interval. A JSM 5800LV Scanning Electron Microscope with a Thermo Scientific EDS was used to analyse the structure and morphology of different aerosol samples from the quartz fibre filters. Eight samples from the different fire lighting methods were selected for SEM analysis. The punched samples were sputter coated with gold for ~15 minutes using a K550 Emitech Sputter Coater. Results show that apart from the fine and ultra-fine particles, coal smoke from domestic burning also contains aerosols greater than 5 μm in diameter. Consequently, we describe the potential for generation of ‘giant’ carbonaceous soot conglomerates with outer diameters of 5 to 100 μm. However, the exact mechanism for formation of such large soot conglomerates remains to be determined. We also describe the presence of spherules and solid ‘melted toffee’ irregular surfaces. Circumstantial evidence is used to postulate and discuss the possible modes of formation in terms of condensation, and partial melting. This work provides a description of the modes of formation and transformation of conglomerates originating from low temperature (<8000C) coal combustion. en_ZA
dc.description.librarian am2015 en_ZA
dc.description.sponsorship The University of Johannesburg for financial support through a URC/Faculty of Science grant to the SeTAR Centre and a grant from the Global Alliance for Clean Cookstoves (GACC) to the SeTAR Centre as a Regional Stove Testing and Development Centre. en_ZA
dc.description.uri http://www.cleanairjournal.org.za en_ZA
dc.identifier.citation Makonese, T, Forbes, P, Mudau, L & Annegarn, HJ 2014, 'Aerosol particle morphology of residential coal combustion smoke', Clean Air Journal, vol. 24, no. 2, pp. 24-28. en_ZA
dc.identifier.issn 2410-972X
dc.identifier.uri http://hdl.handle.net/2263/45072
dc.language.iso en en_ZA
dc.publisher National Association for Clean Air en_ZA
dc.rights This article is licensed under a Creative Commons Attribution 4.0 International License. en_ZA
dc.subject Particle morphology en_ZA
dc.subject Coal combustion en_ZA
dc.subject Conglomerates en_ZA
dc.subject Particulate matter (PM) en_ZA
dc.subject Soot en_ZA
dc.subject Smoke en_ZA
dc.title Aerosol particle morphology of residential coal combustion smoke en_ZA
dc.type Article en_ZA


Files in this item

This item appears in the following Collection(s)

Show simple item record