Ewim, Daniel Raphael EjikeMeyer, Josua P.Noori Rahim Abadi, Seyyed Mohammad Ali2018-08-282018-08Ewim, D.R.E., Meyer, J.P. & Noori Rahim Abadi, S.M.A. 2018, 'Condensation heat transfer coefficients in an inclined smooth tube at low mass fluxes', International Journal of Heat and Mass Transfer, vol. 123, pp. 455-467.0017-9310 (print)1879-2189 (online)10.1016/j.ijheatmasstransfer.2018.02.091http://hdl.handle.net/2263/66348The purpose of this study was to present the heat transfer coefficients and flow patterns during the condensation of R134a inside an inclined smooth tube at low mass fluxes and different temperature differences (the temperature differences were between the saturation temperature and wall temperature). Condensation experiments were conducted at different inclination angles ranging from −90° (vertically downwards) to +90° (vertically upwards), at low mass fluxes of 50, 75, and 100 kg/m2·s, and temperature differences from 1 °C to 10 °C. Measurements were taken at different mean vapour qualities between 0.1 and 0.9 in a smooth tube test section with an internal diameter of 8.38 mm and length of 1.5 m. The average saturation temperature was kept constant at 40 °C. It was found that inclination significantly influenced the flow patterns and the heat transfer coefficients. Downwards flows accounted for an increase in heat transfer coefficient with the maximum heat transfer coefficient found at inclinations of −15° and −30° (downwards flow) at the corresponding minimum temperature difference was tested for in each case. The maximum inclination effect was approximately 60% and was obtained at the lowest mass flux of 50 kg/m2·s. In general, it was concluded that the heat transfer coefficients were more sensitive to the temperature difference for downwards flows than for upwards flows. Furthermore, there was no significant effect of temperature difference on the heat transfer coefficients for upwards flows. It was also found that the downwards and upwards vertical orientations were almost independent of the temperature difference. With respect to the inclination effect, it was found that in general, it decreased with an increase in temperature difference but decreased with an increase in mass flux and vapour quality.en© 2018 Elsevier Ltd. All rights reserved. Notice : this is the author’s version of a work that was accepted for publication in International Journal of Heat and Mass Transfer. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. A definitive version was subsequently published in International Journal of Heat and Mass Transfer, vol. 123, pp. 455-467, 2018. doi : 10.1016/j.ijheatmasstransfer.2018.02.091.InclinationCondensationTemperature differenceHeat transfer coefficientFlow patternsInclination anglesCorrelationDownflow condensationTwo-phase flowHorizontal smoothConvective condensationPressure dropMicrofin tubeFlow pattern visualizationDifferent saturation temperaturesEngineering, built environment and information technology articles SDG-07SDG-07: Affordable and clean energyEngineering, built environment and information technology articles SDG-09SDG-09: Industry, innovation and infrastructureEngineering, built environment and information technology articles SDG-12SDG-12: Responsible consumption and productionPostprint Article