Joen, T.De Jaeger, P.Huisseune, HenkDe Paepe, M.2015-06-242015-06-242010Joen, T, De Jaeger, P, Huisseune, H & De Paepe, M 2010, 'Performance of a single row heat exchanger with metal foam covered tubes', Paper presented to the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Turkey, 19-21 July 2010.http://hdl.handle.net/2263/45749Paper presented at the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Turkey, 19-21 July, 2010.Open cell metal foam Is a novel engineering material that offers an Interesting combination of materials properties from a heat exchanger point of view such as a high specific surface area, tortuous flow paths for flow mixing and low weight A new heat exchanger design with metal foams Is studied In this work, aimed at low airside pressure drop. It consists of a single row of aluminum tubes covered with thin layers (4-8 mm) of metal foam. Through wind tunnel testing the Impact of various parameters on the thermo-hydraulic performance was considered, Including the Reynolds number, the tube spacing and the foam height The results Indicated that providing a good metallic bonding between the foam and the tubes can be achieved, metal foam covered tubes with a small tube spacing and small foam heights potentially offer strong benefits at higher air velocities (> 4 m/s) compared to helically finned tubes. The bonding was done by conductive epoxy glue and was found to have a strong Impact on the final results, showing a strong need for a cost-effective and efficient brazing process to connect metal foams to the tube surfaces.1 pagePDFenUniversity of PretoriaSingle row heat exchangerPresentation