Effect of dimpled rib with arc pattern on hydrothermal characteristics of Al2O3-H2O nanofluid flow in a square duct
Loading...
Date
Authors
Kumar, Anil
Maithani, Rajesh
Sharma, Sachin
Kumar, Sunil
Sharifpur, Mohsen
Alam, Tabish
Gupta, Naveen Kumar
Eldin, Sayed M.
Journal Title
Journal ISSN
Volume Title
Publisher
MDPI
Abstract
The present work is concerned with the experimental analysis of the thermal and hydraulic performance of Al2O3 H2O nanofluid flow in dimpled rib with arc pattern in a square duct. The Alumina nanofluid consists of nanoparticles having a size of 30 nm. Reynolds number (Renum) studied in the square duct range from 5000 to 26,000. The nanoparticle volume fraction (fnp) ranges from 1.5% to 4.5%, the ratio of dimpled-arc-rib-height to print-diameter (HAD/Pd) ranges from 0.533 to 1.133, the ratio of the dimpled-rib-pitch to rib height (PAD/HAD) range from 3.71 to 6.71 and dimpled arc angle (aAD) range from 35 to 65 . The Al2O3 H2O-based nanofluid flow values of Nusselt number (Nurs) and friction factor ( frs) are higher in comparison to pure water. The dimpled ribs in the arc pattern significantly improved the thermal-hydraulic performance of the investigated test section. The nanoparticle concentration of 4.5%, the ratio of dimpled arc rib height to print diameter of 0.933, the relative dimpled arc rib height of 4.64 and the dimpled arc angle of 55 deliver the maximum magnitude of the heat transfer rate. The maximum value of the thermal-hydraulic performance parameters was found to be 1.23 for Al2O3 H2O-based nanofluid flow in a dimpled rib with arc pattern square duct for the range of parameters investigated. Correlations of Nurs, frs and hrs have been developed for the selected range of operating and geometric parameters.
Description
Keywords
Dimpled rib, Rough surface, Nanofluids, Friction factor, Turbulence
Sustainable Development Goals
SDG-04: Quality education
SDG-07: Affordable and clean energy
SDG-09: Industry, innovation and infrastructure
SDG-12: Responsible consumption and production
SDG-07: Affordable and clean energy
SDG-09: Industry, innovation and infrastructure
SDG-12: Responsible consumption and production
Citation
Kumar, A.; Maithani, R.;
Sharma, S.; Kumar, S.; Sharifpur, M.;
Alam, T.; Gupta, N.K.; Eldin, S.M.
Effect of Dimpled Rib with Arc
Pattern on Hydrothermal
Characteristics of Al2O3-H2O
Nanofluid Flow in a Square Duct.
Sustainability 2022, 14, 14675.
https://DOI.org/10.3390/su142214675.