A dynamic flotation model for real-time control and optimisation

Show simple item record

dc.contributor.advisor Craig, Ian K.
dc.contributor.coadvisor Le Roux, Johan Derik
dc.contributor.postgraduate Oosthuizen, Daniël Jacobus
dc.date.accessioned 2023-03-03T06:11:41Z
dc.date.available 2023-03-03T06:11:41Z
dc.date.created 2023-05-12
dc.date.issued 2023
dc.description Thesis (PhD (Electronic Engineering))--University of Pretoria, 2023. en_US
dc.description.abstract Froth flotation models that are developed for circuit design applications are often not suitable for model-based dynamic control and optimisation applications. For real-time control and optimisation applications dynamic models of the key flotation mechanisms are required, as these use real-time measurements to update internal model states and estimate model parameters in real-time. The development of a dynamic froth flotation model is described, based on a combination of fundamental mass and volume balances, fundamental steady-state froth models and empirical models for bubble size and air recovery. The model outputs are defined to correspond with real-time measurements that are commonly available on industrial flotation circuits, including measurements from froth imaging devices in combination with measurements of levels, flow rates, densities and grades. The flotation model is analysed for state observability and controllability, and it is shown that the model states and parameters can be estimated from real-time process measurements that are commonly available on industrial flotation circuits. The ability to estimate process parameters in real-time opens up opportunities for improved process control and optimisation by compensating for a specific flotation mechanism rather than the combined effect of multiple flotation mechanisms. The speed of response can also be improved when more accurate models are maintained by continuously updating model parameters. The flotation model, a state and a parameter estimator and model predictive controller are combined to simulate the potential benefits of using a non-linear model-based approach with state and parameter estimation capabilities in a dynamic control and optimisation application on flotation circuits. The strategy is shown to reject typical process disturbances effectively in the presence of process noise and outperforms a linear non-model based control strategy by a significant margin. en_US
dc.description.availability Unrestricted en_US
dc.description.degree PhD (Electronic Engineering) en_US
dc.description.department Electrical, Electronic and Computer Engineering en_US
dc.identifier.citation * en_US
dc.identifier.doi https://doi.org/10.25403/UPresearchdata.22197514.v1 en_US
dc.identifier.other A2023
dc.identifier.uri https://repository.up.ac.za/handle/2263/89946
dc.language.iso en en_US
dc.publisher University of Pretoria
dc.rights © 2022 University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria.
dc.subject Flotation en_US
dc.subject Model predictive control en_US
dc.subject Modelling en_US
dc.subject Moving horizon estimator en_US
dc.subject Observability en_US
dc.subject Optimisation en_US
dc.subject Process control en_US
dc.subject Process optimisation en_US
dc.subject Simulation en_US
dc.subject State and parameter estimation en_US
dc.subject UCTD en_US
dc.title A dynamic flotation model for real-time control and optimisation en_US
dc.type Thesis en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record