Abstract:
This study is focused on modifying an existing solenoid valve based semi-active hydropneumatic spring-damper system using Magneto-Rheological (MR) fluid. The MR fluid's effective viscosity can be altered by application of a magnetic field. Therefore, using a magnetic/ MR valve makes it possible to change the state of the system by simply changing the applied magnetic field. A prototype MR valve was developed to determine whether a unit small enough for installation was possible. This prototype valve was designed from first principles and properties such as pressure drop over the valve (damping) and flow blocking (for switching between spring characteristics) were measured. The measured pressure drop over the valve was higher than what was design for which was due to an incorrect assumption for the viscosity of the thixotropic MR Fluid. The flow blocking ability of the valve was determined by constant force tests. Results showed that the valve could virtually block the flow of fluid for approximately a quarter of the vehicles weight. With the second prototype, the valve design and magnetic circuit design were improved. Two valves were constructed and implemented on a prototype suspension system. The damping characteristics of the system were lower than expected, however they can be improved by changing the valve geometry. The base spring characteristics are acceptable, however the higher spring characteristics fail when a high force is exerted on the strut that exceeds the valves flow blocking capability. The response time of the valve is not yet sufficient to make the system viable for real world implementation, especially under extreme conditions that can change more rapidly than the current valves.
