dc.contributor.author |
Filip, P.
|
|
dc.contributor.author |
Hausnerova, B.
|
|
dc.contributor.author |
Cucova, L.
|
|
dc.date.accessioned |
2014-12-08T12:22:11Z |
|
dc.date.available |
2014-12-08T12:22:11Z |
|
dc.date.issued |
2012 |
|
dc.description.abstract |
Paper presented at the 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta, 16-18 July, 2012. |
en_ZA |
dc.description.abstract |
Feedstocks used in the process of powder injection moulding characterized by the flow of highly filled (60 vol.%) compound into a mould cavity, sometimes exhibit non- monotonous flow behaviour of viscosity in dependence on shear rate. A new 7-parameter rheological model was proposed and applied to the feedstock based on aluminium oxide powder and multicomponent partly water-soluble polymeric binder. Structural changes of the feedstock caused by shear deformation were quantified in terms of yield stresses obtained using the classical monotonous Herschel-Bulkley and Casson models. Unlike these models the newly proposed 7-parameter rheological model is valid in the whole shear rate range measured. |
en_ZA |
dc.description.librarian |
dc2014 |
en_ZA |
dc.format.extent |
4 pages |
en_ZA |
dc.format.medium |
PDF |
en_ZA |
dc.identifier.citation |
Filip, P, Hausnerova, B & Cucova, L 2012, On the modelling of non-monotonous viscosity describing feedstock behaviour in powder injection moulding, Paper presented to the 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta, 16-18 July, 2012. |
en_ZA |
dc.identifier.isbn |
9781868549863 |
|
dc.identifier.uri |
http://hdl.handle.net/2263/42870 |
|
dc.language.iso |
en |
en_ZA |
dc.publisher |
International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics |
en_ZA |
dc.relation.ispartof |
HEFAT 2012 |
en_US |
dc.rights |
University of Pretoria |
en_ZA |
dc.subject |
Feedstocks |
en_ZA |
dc.subject |
Powder injection moulding |
en_ZA |
dc.subject |
Powder injection |
en_ZA |
dc.subject |
Non- monotonous flow behaviour |
en_ZA |
dc.subject |
Viscosity |
en_ZA |
dc.subject |
Aluminium oxide powder |
en_ZA |
dc.subject |
Herschel-Bulkley |
en_ZA |
dc.subject |
Casson model |
en_ZA |
dc.subject |
7-parameter rheological model |
en_ZA |
dc.title |
On the modelling of non-monotonous viscosity describing feedstock behaviour in powder injection moulding |
en_ZA |
dc.type |
Presentation |
en_ZA |