Effect of chitosan's degree of deacetylation on the performance of PES membrane infused with chitosan during AMD treatment

Show simple item record

dc.contributor.author Mathaba, Machodi
dc.contributor.author Daramola, Michael Olawale
dc.date.accessioned 2021-08-05T06:14:51Z
dc.date.available 2021-08-05T06:14:51Z
dc.date.issued 2020-03
dc.description.abstract Acid mine drainage is an environmental problem associated with mining operations and activities. Its treatment is essential to achieving environmental sustainability. In this study, a polyethersulphone (PES) membrane infused with chitosan is proposed as a point-of-use material for treating acid mine drainage (AMD). The composite material explored the synergetic effect between chitosan and polymer, particularly considering the effect of the degree of deacetylation (DD) of chitosan on the performance of membrane. Chitosan was produced from chitin under various synthesis process conditions and infused within polyethersulphone membrane. The results obtained show that chitosan with the highest degree of deacetylation was achieved with a temperature of 100 ◦C and NaOH concentration of 40 wt%. Increasing the temperature above 100 ◦C started degrading already formed or exposed amine groups, thus, reducing the DD of the chitosan sample. The contact angle and porosity analysis indicated that the hydrophilic nature of the membrane was enhanced with increasing DD of the chitosan. The performance of the membranes was conducted on a Dead-end filtration cell using synthetic acid mine drainage. The results showed that the flux and rejection of the membrane was enhanced with increasing degree of deacetylation. PES 5 and PES 1 were blended with chitosan having the highest (95.97%) and lowest (33.93%) degree of deacetylation, respectively. PES 5 reported pure water flux of 123 L/m2 ·h and PES 1 was recorded as 104 L/m2 ·h. Similarly, the rejection of the membrane was improved with increasing chitosan’s degree of deacetylation. PES 5 had higher rejection and PES 1 had the least rejection. Maximum rejection for the contaminants was determined as 98.05, 97.39, 96.25, 95.24 and 80.34% for Mn2+, Fe2+, Mg2+ and Ca2+ and SO4 2−, respectively. The results obtained show that chitosan’s degree of deacetylation has a positive effect on the performance of polyethersulphone membrane during the treatment of acid mine drainage. en_ZA
dc.description.department Chemical Engineering en_ZA
dc.description.librarian pm2021 en_ZA
dc.description.sponsorship The National Research foundation of South Africa en_ZA
dc.description.uri http://www.mdpi.com/journal/membranes en_ZA
dc.identifier.citation Mathaba, M.; Daramola, M.O. Effect of Chitosan’s Degree of Deacetylation on the Performance of PES Membrane Infused with Chitosan during AMD Treatment. Membranes 2020, 10, 52. https://doi.org/10.3390/membranes10030052. en_ZA
dc.identifier.issn 2077-0375 (online)
dc.identifier.other 10.3390/membranes10030052
dc.identifier.uri http://hdl.handle.net/2263/81159
dc.language.iso en en_ZA
dc.publisher MDPI en_ZA
dc.rights © 2020 by the authors. Licensee: MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license. en_ZA
dc.subject Polyethersulphone membrane en_ZA
dc.subject Chitosan en_ZA
dc.subject Degree of deacetylation en_ZA
dc.subject Hydrophilicity en_ZA
dc.subject Acid mine drainage en_ZA
dc.subject Polyethersulphone (PES) en_ZA
dc.subject Acid mine drainage (AMD) en_ZA
dc.title Effect of chitosan's degree of deacetylation on the performance of PES membrane infused with chitosan during AMD treatment en_ZA
dc.type Article en_ZA


Files in this item

This item appears in the following Collection(s)

Show simple item record