Abstract:
Biological sulphate reduction (BSR) has been identified as a promising alternative technology for the treatment of acid mine drainage. BSR is a process that uses sulphate reducing bacteria to reduce sulphate to sulphide using substrates as nutrients under anaerobic conditions. The performance of BSR is dependent on several factors including substrate, pH, temperature and hydraulic retention time (HRT).
In a quest to find a cost effective technology, Mintek conducted bench-scale tests on BSR that led to the commissioning of a pilot plant at a coal mine in Mpumalanga province, South Africa. This current study forms part of the ongoing tests that are conducted to improve Mintek’s process. The purpose of this study was to investigate the robustness of Mintek’s process and to develop a tool that can be used to predict the process’ performance with varying pH, temperature and HRT.
Design Expert version 11.1.2.0 was used to design the experiments using the Box-Behnken design. In the design, pH ranged from 4 to 6, temperature from 10 °C to 30 °C and HRT from 2 d to 7 d with sulphate reduction efficiency, sulphate reduction rate and sulphide production as response variables. Experiments were carried out in water jacketed packed bed reactors that were operated in a down-flow mode. The reactors were packed with woodchips, wood shaving, hay, lucerne straw and cow manure as support for sulphate reducing bacteria (SRB) biofilm. Cow manure and lucerne pellets were used as the main substrates and they were replenished once a week. These reactors mimicked the pilot plant.
The data obtained were statistically analysed using response surface methodology. The results showed that pH did not have a significant impact on the responses (p>0.05). Temperature and HRT, on the other hand, greatly impacted the process (p<0.05) and the interaction between these two factors was found to be strong. Sulphate reduction efficiency and sulphate reduction rate decreased by over 60 % with a decrease in temperature 30 °C to 10 °C. Generally, a decrease in sulphide production was observed with a decrease in temperature. Overall, a decrease in HRT resulted in a decline of sulphate reduction efficiency and sulphide production but favoured sulphate reduction rate.
This study demonstrated that Mintek’s process can be operated at pH as low as 4 without any significant impact on the performance. This decreases the lime requirements and sludge production during the pre-neutralisation stage by close to 50 %. There was, however, a strong interaction between temperature and HRT which can be used to improve the performance especially during the winter season.
