Synthesis and characterization of nanostructured hematite for photoelectrochemical water splitting

Show simple item record

dc.contributor.advisor Diale, M. (Mmantsae Moche)
dc.contributor.coadvisor Kruger, T.P.J. (Tjaart)
dc.contributor.postgraduate Nyarige, Justine Sageka
dc.date.accessioned 2021-02-15T09:12:24Z
dc.date.available 2021-02-15T09:12:24Z
dc.date.created 2021-05-06
dc.date.issued 2021
dc.description Thesis (PhD)--University of Pretoria, 2021. en_ZA
dc.description.abstract This study aims to synthesize nanostructured hematite films using spray pyrolysis at different deposition temperatures. L-arginine was used to transform the irregular shaped nanoparticles to uniform nanospheres by chemical bath deposition at 90°C for 48 h. We also investigated the variation of L-arginine: iron precursor concentrations from 1:1 to 3:1, respectively. Likewise, hematite films doped with zinc (Zn), silver (Ag), and Zn/Ag were synthesized using spray pyrolysis. All the films were annealed at temperatures ranging from 450 to 500°C for complete hematite phase transformation. The films were used as photoanodes in photoelectrochemical (PEC) water splitting experiments. X-ray diffraction confirmed the formation of the corundum hexagonal structure of hematite with space group. Raman spectroscopy further confirmed the polycrystalline hematite symmetry with two Eg and five A1g vibrational phonon modes. UV-Vis absorption showed a variation of absorbance with bandgaps that ranged from 2.10 to 1.90 eV. Scanning electron microscopy reported the shape transformation of nanoparticles to nanospheres that ranged in size from 6 to 100 nm. The study showed that the nanostructured films synthesized at temperatures of 430 and 400°C have the highest photocurrent densities of 6 and 1.52 µAcm-2, respectively. There was an improvement of the photocurrent density from 6.4 to 10 µAcm-2 after the transformation of pristine irregularly shaped hematite nanoparticles to spherical hematite. However, on the variation of L-arginine: iron precursor concentrations, a photocurrent of 9.8 µAcm-2 was obtained for 3:1 sample. Also, an improvement of photocurrent from 17 to 89 µAcm-2 was observed for films prepared at 30 and 50 mM iron precursor concentration, respectively. In addition, there was a significant increase in the photocurrent density from 40 to 813 µAcm-2 for pristine and Zn/Ag hematite films, respectively. Ultrafast transient absorption spectroscopy was used to study the electron-hole recombination rates and lifetimes. The results indicated four lifetimes obtained from global analysis with a reduction in the electron-hole recombination rate in the femtosecond and nanosecond range, both for L-arginine/hematite and doped samples. From this study, we were able to prove that the nanostructured and doped hematite films had a longer charge carrier lifetime compared to bulk hematite. en_ZA
dc.description.availability Restricted en_ZA
dc.description.degree PhD en_ZA
dc.description.department Physics en_ZA
dc.description.sponsorship African Laser Center (ALC) National Research Foundation (NRF) Grant no. N0115/115463 (SARChI, M.D.) University of Pretoria en_ZA
dc.identifier.citation * en_ZA
dc.identifier.other A2021 en_ZA
dc.identifier.uri http://hdl.handle.net/2263/78594
dc.language.iso en en_ZA
dc.publisher University of Pretoria
dc.rights © 2019 University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria.
dc.subject UCTD en_ZA
dc.subject Renewable energy en_ZA
dc.subject Nanomaterials
dc.subject Material Science
dc.title Synthesis and characterization of nanostructured hematite for photoelectrochemical water splitting en_ZA
dc.type Thesis en_ZA


Files in this item

This item appears in the following Collection(s)

Show simple item record