dc.contributor.advisor |
Zietsman, Johan |
|
dc.contributor.coadvisor |
Akdogan, Guven |
|
dc.contributor.coadvisor |
Taskinen, Pekka |
|
dc.contributor.postgraduate |
Malan, Willem Dutoit |
|
dc.date.accessioned |
2019-07-08T13:32:44Z |
|
dc.date.available |
2019-07-08T13:32:44Z |
|
dc.date.created |
2019-09-03 |
|
dc.date.issued |
2018 |
|
dc.description |
Thesis (PhD)--University of Pretoria, 2018. |
en_ZA |
dc.description.abstract |
In this study, the iron-titanium-vanadium-oxygen (Fe-Ti-V-O) system in equilibrium with air was
studied experimentally by high-temperature equilibration, quenching, scanning electron microscope
and microprobe analysis coupled with critical assessment and thermodynamic evaluation. The thermodynamic
evaluation was performed with FactSage 7.0. The purpose of the study was to develop
a set of Gibbs equations for all compounds and solutions of the Fe-Ti-V-O system in equilibrium
with air, using the well-known calculation of phase diagram (CALPHAD) technique. The study was
categorically divided into three separate investigations. The lower order Fe-V-O and Ti-V-O systems
in equilibrium with air were st experimentally investigated and thermodynamically assessed. This
was then followed by an experimental investigation and thermodynamic assessment of the Fe-Ti-V-O
system in equilibrium with air.
The Fe-V-O and Ti-V-O systems in equilibrium with air were studied experimentally in temperatures
ranging from 700 C to 1500 C. The measured concentration of Fe in the V-O slag is 35
weight % at 1400 C, and the measured V concentration in the hematite phase reached a maximum
of 4.4 weight % at 1350 C. A signi cant amount of precipitation was observed for Fe-V-O samples
quenched at 1400 C, causing calculated standard deviations of Fe and V to be more than 1 weight
%. The measured concentration of Ti in the V-O slag is less than 6 weight % at 1500 C, and the
measured V concentration in the rutile phase reached a maximum of 15 weight % at 1400 C.
The solubility of V2O5(s) in the hematite and rutile phases was described with the compound
energy formalism. The properties of the liquid phase were described with both the modi ed quasichemical
model and the associate species model. A set of self-consistent thermodynamic parameters
was estimated within acceptable error limits. The calculated phase diagrams of Fe-V-O and Ti-V-O
in equilibrium with air are presented and compared to experimental observations and other literature
data.
Before experiments in the Fe-Ti-V-O system in equilibrium with air were conducted, the Fe-Ti-O
system in equilibrium with air was critically assessed and thermodynamically evaluated. This was due
to the slag phase and solid solutions of the Fe-Ti-O system that were previously thermodynamically
evaluated only under reducing conditions. However, limited data were available in literature, hence
assumptions were required for the evaluation. Nevertheless, an improved phase diagram of the
Fe-Ti-O system in equilibrium with air was calculated.
Thereafter, isothermal planes were calculated from optimized binary parameters to estimate a
range of plausible starting compositions for experiments of the Fe-Ti-V-O system in equilibrium with
air. The Gibbs phase rule was carefully applied to avoid redundant experiments. The Fe-Ti-V-O
system in equilibrium with air was studied experimentally, ranging from 1000 C to 1400 C.
The properties of the liquid phase were successfully described with the quasichemical model by
optimizing parameters only related to the Fe-Ti-O system. The model for the rutile solid solution
was extended to describe the solubility of Fe2O3(s) and V2O5(s) simultaneously. The model for the
hematite solid solution was similarly extended to describe the solubility of TiO2(s) and V2O5(s) simultaneously.
The ferropseudobrookite solid solution was modelled with a simple polynomial model
to include a small solubility region of V2O5(s). A nal set of self-consistent thermodynamic parameters
was estimated within acceptable error limits. Calculated isothermal projections at 1000 C,
1100 C, 1200 C, 1300 C, and 1400 C are presented and compared to experimental observations. |
en_ZA |
dc.description.availability |
Unrestricted |
en_ZA |
dc.description.degree |
PhD (Metallurgical Engineering) |
en_ZA |
dc.description.department |
Materials Science and Metallurgical Engineering |
en_ZA |
dc.identifier.citation |
Malan, WD 2018, Phase equilibria and thermodynamic evaluation of the Fe-Ti-V-O system in air, PhD (Metallurgical Engineering) Thesis, University of Pretoria, Pretoria, viewed yymmdd <http://hdl.handle.net/2263/70632> |
en_ZA |
dc.identifier.other |
S2020 |
en_ZA |
dc.identifier.uri |
http://hdl.handle.net/2263/70632 |
|
dc.language.iso |
en |
en_ZA |
dc.publisher |
University of Pretoria |
|
dc.rights |
© 2019 University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria. |
|
dc.subject.other |
UCTD |
|
dc.title |
Phase equilibria and thermodynamic evaluation of the Fe-Ti-V-O system in air |
en_ZA |
dc.type |
Thesis |
en_ZA |